Home How-to Learn to Fix the No Internet, Secured Error on Windows

Learn to Fix the No Internet, Secured Error on Windows

72
0
Advertisement

Fix the No Internet, Secured Error on Windows : Several fixes are available for this ambiguous error. Unfortunately, these depend on your computer setup and network adaptor. As such, not all these fixes will work. However, we’ve listed them in order of likelihood—just work through the tips in order.

This list will give you an idea of what’s required to fix the “No Internet, secured” error:

  1. Disable your VPN
  2. Refresh the Windows 10 IP configuration
  3. Reset Winsock
  4. Check your PC’s connection properties
  5. Disable IPv6
  6. Set a New DNS Server
  7. Update the network device driver
  8. Run the Network Troubleshooter in Windows 10

Take the time to read the steps carefully before attempting to fix the error.

1. Disable Your VPN

Have you connected your PC to the local Wi-Fi network, only to be surprised by the “No Internet, secured” error?

Don’t worry. If you’re using a VPN, the VPN client’s built-in security features can cause this problem. Specifically, it can be the kill-switch designed to disconnect you from the internet when the VPN server goes down.

To check if this is the problem, disable your VPN (using the disconnect function) or even exit it entirely. Then take a moment to reconnect to the internet and try a regularly updated website—perhaps a news site.

If everything connects, then the problem was with the VPN server. Update your VPN client if possible, then connect to a new VPN server. If everything connects okay, you’ve fixed the error!

2. Refresh the Windows 10 IP Configuration

Are you not using a VPN yet still experiencing continued incidence of the “No Internet, secured” message? Some commands are available to help you deal with the error.

Right-click Start, then select Windows PowerShell. Here, enter the following commands in order:

ipconfig /release
ipconfig /renew

This will force your computer to request a new IP address from your local router. In many cases, this will resolve the error.

3. Reset Winsock

Another command-line solution to the “No Internet, secured” error is to reset Winsock.

Its name sounds like a feature of your local airfield, but Winsock is actually the Windows Sockets API. This is a specification for your PC’s communication with network services, specifically the widely used TCP/IP.

To reset Winsock, use the following command:netsh winsock reset catalog

Wait a moment; if the network doesn’t automatically reconnect, do so manually.

4. Check Your PC’s Connection Properties

Still no joy? It’s time to check your PC’s network adaptor.

  1. Open the settings screen by clicking the Wi-Fi connection icon in the system tray, then Network & Internet Settings.
  2. Here, click Change adaptor options, right-click the connection concerned, and click Properties. Confirm the following are checked:
  • Client for Microsoft Networks
  • File and Printer Sharing for Microsoft Networks
  • Internet Protocol Version 4 (TCP/IPv4)
  • Internet Protocol Version 6 (TCP/IPv6)
  • Link-layer Topology Discovery Responder

Click OK to confirm. If you made any changes, restart Windows when prompted.

5. Disable IPv6

IPv6 is a networking protocol designed to replace IPv4 due to the latter running out of IP addresses. However, while IPv6 should run on most hardware, it is susceptible to errors.

You can disable IPv6 by repeating the previous step. Simply uncheck Internet Protocol Version 6 (TCP/IPv6), then click OK to confirm the choice. Restart your Windows 10 PC when prompted.

6. Set a New DNS Server

The Domain Name System (DNS) is like the internet phonebook, except it is automated and covers the entire globe. For example, when you type www.makeuseof.com in your address bar, DNS converts the URL into an IP address, taking you to the website you requested.

However, sometimes the default DNS configuration on your system fails. While it isn’t always apparent if that is the cause of the “No Internet Secured” error, it is a fix worth trying.

Fix the "No Internet, Secured" Error on Windows
Learn to Fix the No Internet, Secured Error on Windows » Walnox
  1. Open the settings screen by clicking the Wi-Fi connection icon in the system tray, then Network & Internet Settings.
  2. Here, click Change adaptor options, right-click the connection concerned, and click Properties.
  3. Select Internet Protocol Version 4 (TCP/IPv4) > Properties.
  4. Check Use the following DNS server addresses and input:
  5. Preferred DNS Server: 9.9.9.9
  6. Alternative DNS Server: 1.1.1.1
  7. Press OK

7. Update Your Network Device Driver

As there is a chance that the device driver for your network card is at fault, it’s worth updating it.

  1. Right-click Start and select Device Manager.
  2. Here, expand Network Adapters, select your network device, then right-click and select Update driver.
device manager update network adapter » Walnox
Learn to Fix the No Internet, Secured Error on Windows » Walnox

Wait while the device driver is updated, then reboot Windows. If successful, Windows 10 should automatically connect to the network as usual.

If this doesn’t work, try Disable device, reboot the computer, then Enable Device.

8. Run the Network Troubleshooter in Windows 10

Finally, if you’re still receiving the “No Internet, secured” error message and the computer remains offline, try this.

Windows 10 features several troubleshooting tools, software toolkits that automatically check for errors and make (or suggest) repairs.

To launch the Network Troubleshooter, press Windows key + I to open Settings, then Network & internet > Network troubleshooter.

windows 10 network adapter troubleshooter » Walnox
Learn to Fix the No Internet, Secured Error on Windows » Walnox

Follow the steps provided in the tool to repair your network connection.

Comment below if you have any questions regarding this!!!

LEAVE A REPLY

Please enter your comment!
Please enter your name here